Trapstar Keychain & Logo
LauraBurgess
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-01-27 04:26:38
0
0
000설명
태그
모델 소스
리뷰(0)
Trapstar Keychain & Logo
Contains multiple versions:
- Hollow - Keychain with text
- Solid - Plain Keychain with no text
- Horizontal & Vertical - different orientation of hole for keyring - see bellow
Also contains models with no hole for keyring (all versions), called logo. You can add your own directly inside slicer, or print it as it is, like a logo
Hollow vs. Solid
| Hollow | Solid |
 |  |
|
|
Horizontal vs. Vertical
| Horizontal | Vertical |
 |  |
|
|
I printed it with following settings
| Nozzle | 0.4mm |
| Layer Height | Horizontal - Variable - Adaptive (highest possible, smaller around hole) |
| Vertical - Highest possible | |
| Wall Loops | 12 or more (to replace infill) |
| Infill | Replaced by walls |
| Supports | None |
| Brim | None |
Printing takes around 10-15 minutes (depends on model) on Bambu Lab A1 mini (Standard speed)
태그
모델 소스
원본 링크: 자세히 보기
CC-BY