This is a holder for a garden hose with swappable head / nozzle. I used a "L metal mount" with a width of ~50mm, and a height of ~2.5mm.

The part is designed to be press-fitted into the L mount, while a Ziptie can be used to secure it in place.

Supports can be removed using needle pliers. A metal scraper can be used to separate the support from the model layers first.

For a finish touch I spray painted the print (with the L mount) for a unified look.

print settings:

• Material: PETG.
• Layer height: 0.2 (0.2 SPEED profile for MK4 IS with 0.4 nozzle diameter).
• Support: yes, everywhere.
• Perimeters: 3.
• Infill: 15%.