Summary

UPDATED: 4/9/2023 Video of Mill now Years later! you can see these parts below in many of the videos on this channel making parts for motorized bicycle builds now! This new version will be added shortly to this project! https://youtu.be/xwqrEGD05qw

Was not going to publish this, But to many people asked me in forums! so back tracking to make videos since this been in use for 2 years now! Y axis build Video is found below along with the other Axis parts!

Y AXIS BUILD VIDEO: https://www.youtube.com/watch?v=TweJBoyL9yA

All Parts where printed in PLA at .2 layers and .2 head size. 30% fill. I use the hand cranks on my mini mill to align the parts for the cnc operation. You could mill objects with the hand cranks fine as long as your not to rough on it. It's mini mill so slow is the game anyhow! I may do a MACH3 Setup Video also Shortly!

X AXIS IS LOCATED HERE: http://www.thingiverse.com/thing:1832280
Z AXIS LOCATED HERE: http://www.thingiverse.com/thing:1836146

YOU WILL NEED:
9X 1/4 "6.35MM" BOLTS/NUTS/WASHERS TO BOLT COVER TO THE Y MAIN PLATE
2X 6MX65MM LONG BOLTS HEX KEY CAP TYPE
2X 6MM WASHERS
2X 6MM LOCK WASHERS
1X 28OD X 12MM WIDE X 12MM CENTER ID BERARING
1x 5/16 or 8mm locking nut!

"ONE SIDE NOTE*

ON THE TOP OF THE BEARING BLOCK THERE IS A HOLE!!!!
THEN USE A SHORT SCREW TO PLUG IT! THIS WILL BE HOW YOU CAN GET OIL TO THE BEARING WITHOUT TAKING IT ALL APART! I