My original clear plastic handle broke, so I designed this to repair it.
One notable difference with the original is that I discarded the clip.

Here I used  Honeycomb infill with Neon Green Prurament PETG and a 0.4 nozzle.

Bill of Materials

• x3 M3 heatset inserts
  • Mine were small ones, 4mm in height
• x3 M3 - 12 mm Socket Cat bolts

Assembly

The two parts are different, one is meant to receive the heatset inserts and the other side for the bolts.
The side for the inserts is the one where the holes go deeper and are wider, I hope this makes sense.

Refer to JerryRigEverything's video for assembly: 

Remixing

The source file is available at OnShape over here: https://cad.onshape.com/documents/c7a08636eb0701545a169dd2/w/315efe893cb1dc8097a58004/e/a9d2e67a19507762fede1338?renderMode=0&rightPanel=variableTablePanel&uiState=668805e53061dc322dcbfbdc .