This is the model I use a lot in my everyday life. I decided to fix all the issues i found, make it parametric and release it so anyone can enjoy it. It's designed to hang from drawer front as a spare container (similar to Ikea Önsklig). But as it's parametric - you can tune it to your needs.

This still needs some polishing (better documentation, more options exported to STL files) but all the stl files as well as fusion file are ready to use.

What  parameters can you change

• depth
• width (with some discreet values - because of the slots)
• length of the hooks
• thickness of the drawer door you will hang it on.

height of the container is currently fixed. Maybe I will parameterize it in the future.

How to print

Should work with any material. Print hooks on side. There is no need to use any supports.

How to edit parameters

You need to have Fusion 360 software (if you don't have it - use some prepared STL files or let me know - I will add dimensions you need in my spare time). In fusion open the project file and from MODIFY menu choose Change parameters.

Hints

• Use more hooks for bigger sizes
• You don't give width as a parameter - you give number of “slots” - but it's easy to calculate width - multiply number of slots by 10 and add 10 - you get the width in mm.

Assembly

When attaching hooks start from the edge of the tray