Cool ball for funny throwing. It never bounces off normally. It's made of flexible plastic and jumps well.

The printing was surprisingly without any problems. For the test I used a 50% reduction of the original STL file. The result is shown in the picture.

I used the recommended Profile from Prussia, the collar of the print and I loosened the print head. I applied a thin layer of glue to the pad.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

Yes

Supports:

Infill:

10%

Filament:

Filatech FilaFlex 40

blue

Category: 3D Printing