Capsela Chain
urban_maker
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-02-02 00:30:44
0
0
000설명
모델 소스
리뷰(0)
Update 07-31-2021 - Better fit with reduced scaling.
Turn Uniform Scaling Off
X 12mm
Y 132%
Z 132%
Update 07-23-2021 - I had the wrong scaling. I had Z 12mm.
Turn Uniform Scaling Off.
Scale:
X 12mm
Y 134.6%
Z 134.6%
This is using an existing drive chain Thing for sprockets in the Capsela construction set. I did not alter the original STLs apart from renaming them.
https://www.thingiverse.com/thing:3313211- fischertechnik compatible parametric print in place gear chain
The original chain is in the foreground of the photos.
The STLs must be scaled to produce the Capsela size chain.
The STL is scaled in the slicer to produce a direct replacement for the unavailable OEM Capsela chain links.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
20%
Filament: Hatchbox PLA Black
Notes:
I used 0.4 wall thickness and 0.16 layer height with 0.2 first layer.
Print speed 50.
It takes about 35 mins to print 10 links, About 3.5 hours to print 2 - 30 links.
Post-Printing
Carefully break the links loose one at a time.
모델 소스
원본 링크: 자세히 보기
CC-BY