Summary

Printed Miniature of Hegemol/False Knight from Hollow Knight. Prints roughly 4 inches tall with plenty of bulk. Roughly 1:1 scale (probably).

Sliced parts are for easier supports on FDM printers and can be assembled with superglue. I haven't experimented with printing the full figure in one go, but have included the files regardless.

Recommend very low infill ~5% or you will be wasting lots of filament. Prints in decent time at 0.15 layer height.

Figure may snap off base easily, if this becomes too much of a problem you can either bury the feet in plenty of 2 part epoxy, or drive in an unfolded paperclip with a soldering iron and pliers as a kickstand.