This is a customizable DIP IC holder, help to keep your electro lab in order. I pre-rendered some typical size, you can simple use that STLs, or customise a new for yourself.

Changelog

26/09/2019

New scad file, with a new parameter. From now you can choose the first/last pin "type". If it's looks like cut at half choose "half_pin", but if looks like all others choose "full_pin". It's pretty important for the overall length of your ICs.
In my picture: For the DIP-8 thats a a half pin, the longer DIP-14 is a full pin ending.

08/27/2019

Initial version

No

0.2

10

2 wall, 3 top/bottom layer should be enough to keep it fast printable.

If your IC's are sensitive for static electricity you should care with your printed holder. Here some idea about it, I'm not sure which is the best:

• You can buy conductive materials (available in ABS and PLA too). In the specification they wrote it can prevent to collect static electricity. Maybe Carbon fiber filament do the job too.
• There is special sprays for make a thin film layer which can solve this problem. For example "EMI 35 SPRAY".