The Model is 200x200mm in size. You may adjust the X and Y but Z must remain as is.

 You may print at higher layer heights below the Min Depth of 0.48mm

 Actual Depth is 2.2mm

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Blue Gray Transmission Distance: 2.5

PLA BambuLab Basic Gray Transmission Distance: 2

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments. Substitute as you see fit.

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Blue Gray

At layer #14 (1.2mm) swap to Gray

At layer #20 (1.68mm) swap to Jade White for the rest.