The Model is 137.19x240.27mm in size. You may adjust the X and Y but Z must remain the same.

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

BambuLab Basic Black Transmission Distance: 0.3

BambuLab Basic Gray Transmission Distance: 2.5

BambuLab Basic White Transmission Distance: 6

This print uses 3 unique filaments. Substitute to your own needs.

Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to Gray

At layer #19 (1.6mm) swap to White for the rest.