Install the screen in place on the enclosure, then install the Pi 3B+ onto the screen and finally the side plate. If you need to access the USB ports for any reason, remove the side plate for full access

(1) 90 Degree Micro USB Cable

(1) Raspberry Pi 3 - Model B+ - 1.4GHz Cortex-A53 with 1GB RAM https://www.adafruit.com/product/3775

(1) PiTFT Plus 480x320 3.5" TFT+Touchscreen for Raspberry Pi https://www.adafruit.com/product/2441

(5) 18-8 Stainless Steel Button Head Hex Drive Screw 3-48 Thread Size, 3/8" Long https://www.mcmaster.com/92949a326

(4) 18-8 Stainless Steel Hex Nut 3-48 Thread Size https://www.mcmaster.com/91841a004

Fusion 360 Link https://a360.co/2IVrsxR

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.2 mm

Infill:

How I Designed This

Designed in Fusion 360 with a 3D model of the Raspberry Pi 3B+ and touch screen

Category: 3D Printing