This is a lens base cap for Fuji XF lenses (XPro, XT-1, XT-2 etc). It fits snug by friction and differs from the OEM caps in that it does not turn to lock on. Some fitting may be required post printing.

Printrbot

Printrbot Simple Metal

No

No

0.2 mm

100

Printed in PLA at 100% infill. You could reduce the infill for a faster print

This is designed to fit snug with no turn to lock it onto the lens. Some post processing sanding or fitting may be required depending on how well calibrated your printer is. This pretty much fit my Fuji lenses after printing and is held in place by friction.

Its for folks who have lost lens base caps or need extras.

Designed in 123D Design to match Fuji lens base cap specs (measured with micrometer).