This shelf was added to IKEA BROR WORKBENCH to use it as a desk.

Wood: 18 mm thick pine wood panel.

Size of the panel: 109 x 30 to 35 cm.

Wood stud: 2 pieces of 3,4 x 1,8 x 30,8 cm pine wood with R 6 mm edges (to be made with a router).

Printed parts (PLA / No support):

1x Right corner

1x Left corner

2x Upper angle

2x Lower ange

12 wood screws are required. Other M6 screws are the ones provided with the workbench.

Natural wax was used to protect the natural pine wood and to match with the color of the workbench's plywood.

The printed parts can be used on the small side of the bench, just need to reduce the legnth of the shelf.