Nananananananananananan BATMAN!

TPU ski pole basket. Let a Batman mark in your path to let the other people in the trail know that Batman might be around. 

I don't recommand those if you go out skiing with 2 faces people and can be a bit provocative for Mister Freeze. Stay alert, this basket is not a joker.

Printed in TPU on the Prusa Mini, slowly! 4 walls, 4 tops and 5 bottoms. Rectiligne Infill at 40%. 0.4mm Nozzle with 0.15mm layer height.

My pole was 10.7mm at 50mm from the tip to 12.3mm at 100mm of the tip. you can scale it if you need.

I insert it right out of the printer while they were still hot on the pole and forced them until they couldn't move anymore. Then they shrank by the cold after. Be sur to align them as you want them on your ski pole so they will be aligned the same on both of your poles while skiing. 

I tested them already many times in the mountain and they are still tough and didn't move at all even if they hits some trees. 

Enjoy the winter!