Strap for Prusa Face Shield V2:
Stronger and simpler that my original design.

Features:

• Compatible with the Prusa face Shield RC1 - RC2 - RC3
• Designed for TPU with about 98A shore value.
• Fits on 245 mm Prusa MK3 bed.
• Can fit 8 on a single print.
• One size fits most.
• Comfortable on the back of the head.
• You can change the "springiness" by scaling thickness in your slicer to accommodate for the durometer of your TPU.
• You can also affect the elongation capacity by increasing the scale in the Y axis direction (taller = more elongation)

This is not a "remix" but the idea came from "Mark PP":
https://www.thingiverse.com/thing:4253074
Thanks.

Print instructions

This is very easy to print.
I tested the design with Fillamentum TPU FLEX 98A, and with Priline TPU with good results.

The Gcode provided here is optimized for Fillamentum TPU FLEX 98A.