This is a simple Smartphone Dock for many Smartphones with USB-C or similar
Cable. The Dock holds the Smartphone at a comfortable angle and lets you dock and undock with easy.

It fits all Smartphones which are no more than 12mm thick and no more than 160mm long.

To mount the Cable you need two screws 2-3mm thick and 8-11mm long suitable
for plastic.

The Cable i used is the Roline 11.02.9011 but other Cables might fit as well.

In the Pictures is a Huawei Mate 9

This Print was made on the new Leapfrog Bolt 3D Printer with Black PLA
at a rough 0.20 Layer Height, but it looks and feels good.

Feel free to remix the Model with the attached Source-File for 123D Design.

Please let me know if you have any questions.

IMPORTANT: I DO NOT CONSENT TO THIS DESIGN BEING SOLD IN PHYSICAL OR DIGITAL FORM ON ANY PLATFORM!

Remove both Parts from Print-Bed

Move the Cable into the groove within the Stand, position the Cable at an optimal mating hight for the Phone.

Put some Elastic Material or Foam in the Backplate (small Part)

Screw the Backplate with two Plastic screws into the Main Part while making sure
the Cable still has good height so the Phone's Connector can properly mate.

Put the Cable in the Outlet Hole on the Backside of the Stand.

Connect to any USB Port on PC or Charger.