Adapters to connect the Snapmaker bed frame to the linear rail guide supports.

This upgrade adds supports at the front and back corners of the bed frame to prevent bending down during actions at the limits of the Y axis

Version 4 will fit the new design for the metal bedframe.

Version 5 will fit the new bed frame with the bracing kit

Holes spacing on the bearings is not square so to prepare this for printing mirror it in your slicer.
1x normal
1x Mirrored about the vertical axis
1x Mirrored about the horizontal axis
1x Mirrored about both the vertical and horizontal axis

Link for the rails used is provided below.

OrangeA SBR Linear Rail 16-800mm
https://www.amazon.com/gp/product/B07D9JRPG9/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1