This is a clothes hanger for Barbie. I designed it by measuring the original one. You can see a comparison of the original and the printed one in the photos.

For the logo I used https://www.thingiverse.com/thing:1152706

It has to be printed in two parts in order to avoid using supports, and with a high resolution to preserve the details.

It can be assembled with toothpicks and / or glue.

Notes:

To get the logo detail a 0.2mm nozzle is required. With 0.12mm layer height takes about 45 minutes to print both sides of one hanger. To assemble use pieces of toothpicks or any other 2mm rod in the three holes. If the toothpicks have a snug fit, it will hold good enough, but if needed you can use a drop of CA glue as well.