Perfect fitting storage box for the original Bambu Lab filament spool. STL’s and Bambu Studio slicer files included.

WARNING! Enable ‘Ironing’ at own risk.  In my case it caused extruder clogs in my Bambu Lab X1C after finishing the top honeycomb layer mid-print. 

Features:

• Highly detailed (example on photo was printed on textured PEI plate).
• Honeycomb front and back for aesthetics and material saving.
• All edges chamfered in 0,3mm (smooth to the touch).
• None to almost no post processing (sanding).
• Prints without support.
• Snap fit lid.
• Finger hole for easy grip and removing the lid.
• Box dimension is high enough (72mm) to include a desiccant container inside the spool centre (see photo).
• Box dimension is wide enough (209mm) to use a vacuum bag around the spool (see photo).
• Storable standing up or stacked on each other.

The provided Bambu Studio slicer file is set at high detail and produces a near perfect result in Bambu PLA Basic White (see photos). Feel free to experiment to heart content. Guarantees not given. Feedback and questions are welcome.

Edit 30-06-2023:

• Removed 4 mm in height.
• Decreased the snap fit with 0,25 mm.
• Added a standard layer slicer file.

Edit 11-09-2023:

• Added label frame and side window.