Info:

• cabinet / drawer handle
• M4 threads on the bottom of each stand for attaching to furniture
• choose from multiple styles

Print instructions:

• see 3mf
• 0.2 mm layers in general
• no supports
• handle:
  • print handle standing, use a lot of brim (like 12mm)
  • there is slight overhang between the heights 9.3-11.1mm, descrease layer height there, so it is printed nicely (down to 0.08mm)
  • increase infill at the ends, if your drawer is heavy
  • if you want different size (length between the holes in the furniture is diferent), you can easily scale Z Axis (the hole in a stand is more deep, so the handle will still fit in there)
    • given handle size is for the length of 12.8cm between bolt holes
    • so if you want handle for 14cm distance between holes, increase handle size by 1.2cm 

Assembly:

• insert handle to the stands (use a drop of glue or adhesive tape for inside connector, if it is too loose)
• Use M4 bolt for attaching handle with stands to the drawer/cabinet