Refrigerator magnet with a captured dial to help keep track of daily tasks.  Has two indexes per day which can be useful (such as keeping track of if you have already had your second cup of coffee).

There are two versions.  One large one that takes a 1/2" x 1/8" magnet and a smaller one that takes a 10mm x 3mm magnet.

The gcode includes two color changes.  Start with primary color.  First change is for the weave and text color.  Second is the face color around the text (typically same as primary color).

I recommend the following print setting overrides:

1. Set elephant foot compensation to zero (Print Settings→Advanced).
2. Increase bridge flow ratio in the same menu to 1.5
3. Force bridging angle to 180 degrees (Print Settings→Infill)

There is another variant which counts 0-9 here:

https://www.printables.com/model/217031-fridge-counter