Hello.

I made a remix of https://www.prusaprinters.org/prints/3624-mk3s-lcd-knob.

I adjusted it to fit better and adjusted the diameter to 20mm instead of 25mm so it will not come in conflict with the X button.

Print instructions

Printed on a Original PRUSA MK3S.

Filament: Generic PLA
Colour: Whatever you like.
Fill: 20%
Support: No
Filament temperature: 210
Bed temperature: 60

Print settings : 0.15 mm Quality MK3

Sliced with PrusaSlicer 2.0.0