Created image using MidJourney then ran it through Hueforge. Sliced in Bambu Studio. Here are the settings:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Inland Black Transmission Distance: 0.3
Inland Green Transmission Distance: 1
Inland Red Transmission Distance: 2
Inland Yellow Transmission Distance: 8.5

Swap Instructions:
Black until layer #6 at 0.56mms
Green until layer #11 at 0.96mms
Red until layer #22 at 1.84mms
Yellow until layer #32 at 2.64mms