A friend asked if I could print him a shadow casting Halloween decoration, and here it is.
Place on the ground and hammer in the peg to secure to the ground.
Place a light some distance in front of the object, and cast a shadow on your wall.
You can adjust the size and focus by altering your light placement.

It's a super simple print, so feel free to vary from the settings I've prescribed.
I printed with supports for the peg hole, but you can probably get away without it.

SCALING!
Keep the pin at 100%, and drop the Scream guy down to 66% for proper pin fitment.
My bed is 8"x8", so you may want to scale differently for your bed size. Just keep the ratio of pin to scream guy at 1:0.66

No

Yes

0.2 or more

20% or whatever you like