Summary

This little addition to your Lee Press will eject the case when it travels downwards, so you can reload faster :)

https://www.x-targets.at/en/Lee-Challenger-Press.html - This is my press - you may need to change the design if it is not the exact same model.

I load 9mm, it works with 9mm, you likely need a shorter arm if you have bigger bullets.

I used M3 screws to put it together - don't make it tight - just leave it loose so it has a little play to "fall" on the casing.

As always, free to use, sell, mix, it's all yours, but I give no guarantee to anything ;)
Hope you enjoy!