Was looking for a decent compartmented box to keep my CR10V2 print nozzles in. Found "Nozzlebox" by Christian_Kirk ( https://www.thingiverse.com/thing:5031690 ) but since I use 99% 0.4mm MK8 nozzles, I decided to remake the box lid to suit myself. Editing .stl files can be done, but it's pretty much a pain so I redesigned the lid to suit myself and decided there might be others who would want something like this as well.

Christian cut the lettering into the lid but I decided to used slightly raised (1mm) lettering and just lable it "NOZZLES" so I did all-capitals text in the center of the lid and decided to also add a raised tab at the right end to make opening the box a lot easier since the edge of the lid doesn't overhang the box. It came out so well, here is the .stl file for the lid which should fit the original box but like the original lid it can be a bit snug. I used a CR10 V2 printer with the layer thickness set to 0.3mm (not .2mm) for a bit faster print which has worked very well for me over the last year.

If you'd like to change filament color for the lettering, at .3mm/layer, you want to use your slicer's "Change Filament at Layer" plug-in and have it change at layer 7 (the lid is 1.8mm thick and the lettering starts at 1.8mm + .3mm or Layer 7.

If like most, you use .2mm/layer, you would want to do the filament change at layer 9.

Nothing else is even close to complicated.

Creality

CR-10

No

No

.3mm

80%

I used FilaCube "Greenery" color filament as I have several rolls and it prints almost perfectly and for the lettering I used FilaCube "Black" but, of course, use whatever color(s) suits your fancy.