desktop bezels for Cougar MFS in use with 8" 4:3 displays from ebay/ali express using the pcb800099 control board or clone

will need 5 m3 melt in inserts. 3 in the top holes of the front, and 2 go in the bottom holes of the back piece. you will us 5 m3x12mm shcs to hold the two pieces together.

2 m3x20 shcs's will go through the sides holding the bottom of the MFD

there are 2 small holes behind the control board for skews to hold it in place and 2 to hold the function control board, i used small wood screws for those. print 5 buttons and place them in the holes before mounting the control board.

There is a dovetail in the bottom if needed to create a mounting system, mfd wire has a path as to not interfere with dovetail.

Anycubic

Large Size Chiron

Yes

.2

12