This is a model with OpenScad source code of a Raspberry Pi 4 model B. I have been designing a case for the Pi on OpenScad and needed this model to help position the holes and vents etc.

Many thanks to Niccolo Rigacci from https://www.rigacci.net/ for permission to use his Pi 3 OpenScad code as a starting point.

You can print a version of this board without the SD card and pins - just comment out the correct lines in the OpenScad code. If you want to use the model as a guide in a larger model then leave the pins and SD card code in place.

The STL file is ready to print and does not have the pins and SD card.

Note that I have discovered that the USB ports are very slightly too tall in the original design. I am going to upload a corrected version soon.

LulzBot

TAZ 6

No

Yes

0.16

25%