This is a simple customizable box with lid.

The box can be made of any size, and its section can be any regular polygon (triangle, square, pentagon, hexagon, and so on...). You can choose wall thickness and the clearance between the box and the lid, as well as width and height of both box and lid. You can also choose to just print the box, or the lid, or both.

It's a useful Thing if you need a box for something in particular and just can't find the right size. Just put in the right measurements and print it out!

Customization of this model is pretty straightforward, all parameters are explained in-line.

No

No

0.20mm

30%

This is a very easy model to print, nothing particular about it, walls are all vertical.
Perhaps the only risk is a bit of warping if you make it very large.

If you use an Outer Radius of 30mm or above, I suggest using a raft or some other anti-warp mechanism (I use stick glue on my glass plate), to be on the safe side.

Also, the value of the Clearance between the lid and the box should be set according to your printer's level of precision, to avoid having a lid that doesn't fit in the box, or that is too loose.