NEMA Stepper OpenBeam adapters
paprikalever
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2016-04-26 17:43:27
0
0
000설명
태그
모델 소스
리뷰(0)
Summary
A couple of quick adapters to mount NEMA 11 and NEMA 17 stepper motors on 15mm OpenBeam rails. On the bottom are alignment bumps to align the steppers at 0°, 45° and 90°. The mounting specifications for both motors was obtained from the web.
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator Z18
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2mm
Infill:
20
Notes:
Supports are only necessary for the NEMA mounting holes, if you have good bridging with your printer you may be able to skip.
Post-Printing
Mounting screws
Used 2.5mm mounting screws on the NEMA 11, the NEMA 17 required 3mm screws.
태그
모델 소스
원본 링크: 자세히 보기
CC BY