Print at 100% infill with a layer height of 0.12mm with a base layer of 0.16mm

The Model is 197.36x200mm in size

You may print at higher layer heights below the Base Thickness of 0.52mm

The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.2mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3

#006671 PLA Protopasta Mermaid's Tale Metallic Teal Transmission Distance: 4.5

#f97429 PLA Polysonic Orange Transmission Distance: 4

#f3d03e PLA Paramount 3D Simpson Yellow Transmission Distance: 12

#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.76mm) swap to Mermaid's Tale Metallic Teal

At layer #9 (1.12mm) swap to Orange

At layer #14 (1.72mm) swap to Simpson Yellow

At layer #17 (2.08mm) swap to Jade White for the rest.