B&W catenigmatic look
Carolyn Burke
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-07-27 01:45:23
0
0
000설명
태그
모델 소스
리뷰(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.57x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Smart Recycled Coral White Transmission Distance: 6.4
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Coral White for the rest.
The Model is 112.57x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Smart Recycled Coral White Transmission Distance: 6.4
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Coral White for the rest.
태그
모델 소스
원본 링크: 자세히 보기
CC BY