Optimus Prime Transformers
slimmeteor21
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-07-18 17:12:46
0
0
000설명
태그
모델 소스
리뷰(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled White Transmission Distance: 5.6
PLA Smart Recycled Blue Transmission Distance: 2.2
PLA Smart Recycled Red Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to White
At layer #9 (0.8mm) swap to Blue
At layer #10 (0.88mm) swap to White
At layer #16 (1.36mm) swap to Black
At layer #20 (1.68mm) swap to Red
At layer #24 (2mm) swap to White
At layer #28 (2.32mm) swap to Black
At layer #29 (2.4mm) swap to White for the rest.
The Model is 133.33x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled White Transmission Distance: 5.6
PLA Smart Recycled Blue Transmission Distance: 2.2
PLA Smart Recycled Red Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to White
At layer #9 (0.8mm) swap to Blue
At layer #10 (0.88mm) swap to White
At layer #16 (1.36mm) swap to Black
At layer #20 (1.68mm) swap to Red
At layer #24 (2mm) swap to White
At layer #28 (2.32mm) swap to Black
At layer #29 (2.4mm) swap to White for the rest.
태그
모델 소스
원본 링크: 자세히 보기
CC BY