A black white and brown hueforge of a horse

use the following for printing

Here are the filament color details:

Print at 100% infill with a layer height of 0.06mm with a base layer of 0.16mm

The Model is 180x100.78mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.6mm and the Actual Depth is 1.7mm

Filaments Used:
PLA F4P schwarz Transmission Distance: 0.1
PLA Sunlu Matte Red Transmission Distance: 3
PLA Extrudr Grau Metalic Transmission Distance: 1.3
PLA Generic Braun Nicep Transmission Distance: 7.5
PLA BambuLab Basic White Transmission Distance: 7
This print uses 5 unique filaments

Swap Instructions:
Start with schwarz
At layer #10 (0.7mm) swap to Red
At layer #11 (0.76mm) swap to Grau Metalic
At layer #13 (0.88mm) swap to Braun Nicep
At layer #15 (1mm) swap to White for the rest.