Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Steel Grey Transmission Distance: 1 PLA Overture Matte White Transmission Distance: 3.7 PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Charcoal Black At layer #9 (0.8mm) swap to Steel Grey At layer #13 (1.12mm) swap to White At layer #18 (1.52mm) swap to Jade White for the rest.