I needed a holder to hold recipe books while cooking. This is the result. Feel free to use if you find it useful.

This is designed to be held together with a piece of wire you can cut from a coat hanger. It has a 2 millimeter hole through the spline that the wire should fit.

I am using:

CAD Software: Fusion360
Slicer: Cura LulzBot Edition - 3.6.23
Printer: LulzBot TAZ Workhorse

Filament Brand: Inland
Filament Diameter: 1.75mm

Layer Height: .15mm
Initial Layer Height: .35mm
Line Width: .4mm
Wall Thickness: 2mm
Wall Line Count: 3
Top/Bottom Pattern: Zig Zag

Printing Temp: 215 C
Initial Layer Temp: 220 C

Print Speed: 20mm/s
Infill Speed: 40mm/s

If there are any further details you would like, please ask.