This is is a mobile phone stand suitable for iPhone and Android phones, and particularly target at those folks that do mobile app development . I designed it to meet the following goals:

• Able to support an iPhone or a Google Pixel easily.
• No lip on the ledge that the phone rests on. I am constantly picking my phone up off the stand while developing and I don't want to keep pulling the stand over.
• Ventilated back as phones get hot when you are developing on them.
• Prints without supports in as short a time as possible
• High rake angle so the phone screen points up at me as I work. Plus you can push the phone back under your monitor easily
• Notch for a USB cable with the stand high enough for the phone not to rest on the cable.
• No desire or need for the cable to snake under under the stand so no holes under in the back of the base.
• Well balanced so the weight of the phone is well supported and the stand does not wobble.
• Minimize the amount of material used to print, so the design is not thicker than it needs to be.

I printed this in orange Prusament PETG with a 0.4mm nozzle and 0.2mm layers. The design was done in Fusion 360. I parameterized the Fusion 360 model so that I can print this with a different back height and the number and positions of the holes will adjust.

NOTE: If anyone is interested in modifying for their own needs, please let me know and I'll upload the Fusion 360 archive for you. I don't have time to perform customizations for folks - sorry!