This is a great stand and my Wife loved it. Only issue we had was that after a few months the two halves ket falling apart very easily. This re-mix just makes the hinge more robust as it cannot be pulled apart.
Because of this it has to be printed in one piece (laid on side) and cannot be printed in two parts.

I made mine out of PLA on an original Prusa MK3S and the space between the two halves around the hinge pin were big enough that with only slight pressure the two halves closed without breaking when you have finished the print.

Probably open to whatever layer heights and fill you want, I used 0,2mm layer with 15% infill.

Any issues on your printer with the two halves sticking together I can make the gap biigger if you contact me.