direct drive system, 2 simple parts to print. still need to design the cooling channel but so far works wonders. I used 100% infill on pla.

you'll need a bunch of m3 screws, a e3d v6 hot end, a nema 17 damper to bolt it to the extruder (tight fit and might need to grind some touching bolts to prevent vibrations.
a bl touch is optionnal.

some bolts need to be reversed from their original position to fit in the extruding block.

a fan adapter is a good idea to mount a better hotend fan.

more infos coming soon.

happy printing!