I add gcode file with my settings. I only increase the nozzle temperature from 210 to 215 during printing. Gcode is 125% sized .stl. That's beacouse of the realy small SWEDEN word... I also use 0,2mm nozzle and 0,12mm resolution (also beacouse of SWEDEN). I think there is 160% or maybe even 180% flow in the gcode (EDIT: that was before I set the estep, now it's fine with 100% :-) ). That's just fine for my printer and there is ironing too... You can play by yourself with the .stl and find your best settings. Please report your best settings .

If you like my work, you can buy me a cofee or some fine creamy stout, anytime.
https://www.paypal.com/paypalme/kukibiker