Jesus hueforge model.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 199.99x112.49mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA Black Transmission Distance: 0.6
PLA Azure Blue Transmission Distance: 3
PLA Matte Skin Transmission Distance: 0.7
PLA White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Azure Blue
At layer #18 (1.52mm) swap to Skin

Border Only Colors from here until the end.
At layer #24 (2mm) swap to Ivory White for the rest.