The Storm Rune
homelydock98
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-03-31 20:29:39
0
0
000설명
태그
모델 소스
리뷰(0)
⚡ The Storm Rune: Guardian of the Electric Surge
Design Concept
A relic of pure atmospheric power and celestial energy! This electrifying 3D-printed model portrays a rugged grey monolith that serves as a conduit for the living storm. The design is a masterpiece of energy in motion, where the cold indifference of ancient stone is shattered by a pulsing, electric core of lightning bolts. This model is the ultimate centerpiece for those who seek to capture the raw, untamed power of the sky.
Key Features & Aesthetics
The Triple-Bolt Vortex: At the heart of the stone, a central vortex of swirling energy contains three sharp lightning bolt symbols. The entire core pulses with a brilliant, neon-blue light, simulating a high-voltage electrical discharge.
Fractal Lightning Arcs: Brilliant arcs of blue electricity "leak" from the central core, crawling down the face of the stone and into the ground. These fine details create a stunning sense of power overflowing from the artifact.
Weathered Slate Texture: The main body features a jagged, slate-grey voxel-rock texture with deep vertical cracks and runic inscriptions. The contrast between the dark, heavy stone and the bright blue light emphasizes its mystical nature.
Atmospheric Accents: The model is surrounded by stylized swirls of mist and frost-covered ferns at the base, while crystalline icicles hang from above, suggesting a high-altitude or polar environment where the air is thin and charged.
Industrial-Arcane Base: The energy arcs are channeled into the ground through a series of "power conduits" or small metal terminals at the bottom, blending ancient magic with a touch of steampunk or sci-fi engineering.
Print Settings (Optimized)
Printer: Best suited for high-resolution Resin (SLA) to capture the delicate lightning arcs, or high-end FDM; estimated 15h-19h print time.
Layer Height: 0.08 mm. This extra-fine setting is mandatory to ensure the thin electricity tendrils don't break and to maintain the sharpness of the central bolts.
Material: Use Charcoal Grey for the stone and Fluorescent Blue or Transparent Blue PLA/Resin for the lightning. For the best effect, use an LED-compatible translucent material for the core.
Support Strategy: High-precision tree supports are required for the hanging icicles and the delicate arcs of electricity that stand away from the stone surface.
⚡ La Runa del Rayo: Guardián de la Sobrecarga Eléctrica
Concepto de Diseño
¡Una reliquia de puro poder atmosférico y energía celestial! Este electrizante modelo impreso en 3D retrata un monolito gris rugoso que sirve como conducto para la tormenta viva. El diseño destaca por su sensación de energía en movimiento, donde la piedra ancestral es atravesada por un núcleo eléctrico pulsante.
Características y Estética
Vórtice de Triple Rayo: El corazón de la piedra contiene un vórtice de energía con tres símbolos de rayos afilados que brillan con una luz azul neón intensa.
Arcos Eléctricos Fractales: Brillantes arcos de electricidad azul "escapan" del núcleo central, recorriendo la cara de la piedra hasta el suelo.
Textura de Pizarra Desgastada: El cuerpo principal presenta una textura de roca voxel gris pizarra con grietas profundas y runas grabadas.
Detalles de Entorno: El modelo está rodeado de remolinos de niebla, helechos escarchados y carámbanos que cuelgan desde arriba, sugiriendo un ambiente de alta montaña cargado de estática.
Base de Conductos: Los arcos de energía se canalizan al suelo a través de terminales metálicas en la base, mezclando magia antigua con ingeniería arcana.
Ajustes de Impresión
Altura de Capa: 0.08 mm para asegurar que los finos hilos de electricidad y los carámbanos se impriman con total nitidez.
Material: PLA o Resina Gris Carbón y Azul Fluorescente o Translúcido para los efectos de luz.
Soportes: Requiere soportes tipo árbol de alta precisión para los carámbanos superiores y los arcos eléctricos delgados.
태그
모델 소스
원본 링크: 자세히 보기
CC-BY