Print with a layer height of 0.08 mm and a first layer height of 0.16 mm, using 100% infill.

The model size is 150x150mm.

You can use a higher layer height for printing, but it must not be lower than 0.24 mm.

The maximum layer height is 2 mm, with the actual layer height being 1.8 mm.

Three different types of consumables were used:

PLA+ Sunlu Black Transmission Distance: 5.7

PLA+ Sunlu Blue Transmission Distance: 0

PLA+ Sunlu White Transmission Distance: 0.7

This print utilized three distinct types of consumables.

Switch command:

Start with black

Switch to blue at layer 6 (0.56mm)

Switch to white at layer 11 (0.96mm) and keep it until the end.