Project: Rick Wright 250x191.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.4mm

The Model is 250x190.42mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2.3mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Chrominal Shadow Gray Transmission Distance: 3
    PLA Sunlu Meta Grey Transmission Distance: 3.5
    PLA Sunlu Matte White Transmission Distance: 5.3
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.96mm) swap to Shadow Gray
    At layer #11 (1.2mm) swap to Grey
    At layer #16 (1.6mm) swap to White for the rest.