12V Lighter Socket Bracket
jonathan meyer
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-03-20 03:32:19
0
0
000설명
태그
모델 소스
리뷰(0)
Summary
I needed a bracket to mount a 12V lighter socket in my solar garden shed. This bracket can be screwed to a flat surface and then the lighter socket fit into the hole. This is on contrast to mounting the socket into a panel, where you need access to the back side of the panel to hook up the wires.
Print Settings
Printer Brand:
Type A Machines
Printer:
Type A Machines 2015 Series 1
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%, or 3D infill @ 2mm spacing
Post-Printing
You may need to clean out the large hole with a deburring tool to fit your lighter socket. You also have the option of only enlarging part of the hole if your socket has flats on the sides and you want it to fit those.
How I Designed This
Autodesk Fusion 360. YouTube video with the design process below:
https://youtu.be/IRPB8AZ9rxA
태그
모델 소스
원본 링크: 자세히 보기
CC BY