Video: https://www.youtube.com/watch?v=AIPcSTuXWGw

Manual modifications of the gcode are required to make Baum watertight, so I suggest printing Baum.gcode instead of slicing the .stl

Upload Baum.gcode on an SD card and insert it in the printer. Ignore warnings and launch the .gcode from the printer interface.

Baum.gcode is compatible with printers with 0.6mm nozzle and at least 130x130x210mm build volume.

Lower speed down to 50% after the print starts on bowden printers.

Baum.gcode prints in vase mode in 8h with 30g of Polypropylene (PP) filament.

Apply standard plastic adhesive tape (commonly made of PP) to the bed to ensure adhesion.

Tested with Formfutura PP

Website: https://www.riverfamily.art/

Contact: alessio@riverfamily.art

LICENSE: Public Domain

https://creativecommons.org/share-your-work/public-domain/cc0/

Also applies to gcodes, slicing process, pictures, videos and names