Project: mario españa.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 150x150mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 3mm and the Actual Depth is 2.8mm

Filaments Used:

 PLA smartfil negro Transmission Distance: 0.4

 PLA smartfil rojo Transmission Distance: 2.3

 PLA smartfil azul oscuro Transmission Distance: 3

 PLA smartfil azul Transmission Distance: 1.8

 PLA smartfil naranja Transmission Distance: 1.2

 PLA smatfil amarillo Transmission Distance: 5.8

 PLA smartfil White Transmission Distance: 6

This print uses 7 unique filaments

Swap Instructions:

 Start with negro

 At layer #10 (0.88mm) swap to rojo

 At layer #15 (1.28mm) swap to azul oscuro

 At layer #18 (1.52mm) swap to azul

 At layer #20 (1.68mm) swap to naranja

 At layer #23 (1.92mm) swap to amarillo

 At layer #27 (2.24mm) swap to White for the rest.