Skadis mount usable with medium command strips advise laying flat on hooks to print with no support. 16.25 mm mount made for most skadis applications with 20mm offset from wall. Medium command strip with Velcro is 3.75 mm thick added with the 16.25 mm mount makes a 20 mm offset. Slightly bulky but suitable for holding a good amount of weight. Larger command strips are usable but will overlap slightly. 

Update: use the updated 3M mount. The original file is not rounded enough with a 1mm radius filet I changed it to 2mm which rounded the hooks well enough to fit on the skadis. Not sure how to delete the original file upload.