K1C Riser
adam_leroy943
AI로 유사한 모델 찾기
프로필 출력(0)
모델 파일(0)
0
0
0
게시일:2026-01-24 23:05:44
0
0
000설명
태그
모델 소스
리뷰(0)
Design Concept
After trying multiple risers I couldn't find one that was high enough and had some form of ventilation options which didn't involve the print head whacking into it every time it homed in the Y axis before printing. Found this on Makerworld and it is perfect, sitting flush with the rim of the printer and good ventilation options.
Design original: https://**********.com/en/models/199138-k1cgai-zi-zeng-gao-pei-jian
The K1C Riser is designed to enhance the height and airflow of your 3D printer setup, improving print quality through better environmental control. In my case it allows me to print PLA without taking the lid off, just the door open without it getting too hot.
Use Case
Ideal for 3D printing enthusiasts looking to boost the performance of their Creality K1C printers.
Assembly Instructions
Once all elements of the riser are printed simply insert the vents into the slots then either click together.
I slid the parts together where possible used a desk surface to rest the parts on and apply pressure carefully straight down to click together.
태그
모델 소스
원본 링크: 자세히 보기
CC0